non-ferrous metal cleaning agent powder IC-TP106F

The non-ferrous metal cleaning agent powder IC-TP106F has recently been widely loved by foreign customers. It is a white powder solid, which is convenient for export transportation and storage.

Metal cleaning agents are composed of surfactants and added cleaning aids (such as alkaline salts), rust inhibitors, defoamers, spices, etc. There are several types of surfactants as its main components. The domestic ones are mainly non-ionic surfactants. There are 4 types of ethers, esters, amides, and polyethers, which have strong detergency.

When choosing a metal cleaning agent, you should pay attention to the following matters.

The concentration of the cleaning agent has a great relationship with the cleaning effect. Generally, as the concentration increases, the decontamination ability also increases correspondingly, but after reaching a certain concentration, the decontamination ability no longer increases significantly. The general concentration should be controlled at 3-5 percent.

Generally, as the temperature of the cleaning agent increases, its decontamination ability also increases, but after a certain temperature is exceeded, the decontamination ability decreases instead. Therefore, each cleaning agent has a fairly suitable temperature range, not the higher the temperature, the better. Especially for non-ionic cleaning agents, when they are heated to a certain temperature, the cleaning agent will become turbid. The temperature at this time is called the “cloud point”, the solubility of the active agent in water decreases, and some ingredients will decompose due to heat Instead, the decontamination capacity is reduced. Therefore, the temperature of the non-ionic cleaning agent should be controlled below the cloud point.

The cleaning agent formulated at one time can be used multiple times, and its use time mainly depends on the number of cleaning parts and the degree of contamination of the cleaning agent. In general, the cleaning agent formulated at one time can be used continuously for 1 week to 2 weeks. In order to save the amount of cleaning agent and improve the cleaning quality, the cleaning sequence should be reasonably arranged according to the characteristics of the parts when cleaning. For example, the main parts and the less dirty parts are washed first; the secondary parts and the dirty parts are washed later, which can extend the use time of the cleaning agent.

 

 


Post time: Apr-08-2020